Mandrels for Cartridge Rolls


WENDT mandrels can be used with either Straight or Tapered cartridge rolls. The tapered thread screws into the pilot hole and holds the cartridge roll securely in place. See below for recommendations on selecting the proper mandrel.

Details:

Dia. PilotPilot LengthShankShank LengthPart no.PKG
3/32″1″1/8″1″161 8011
3/32″3/4″1/8″1″161 8021
3/32″1/2″1/4″1″161 8041
3/32″3/4″1/4″1″161 8051
1/8″1/2″1/8″1″161 8101
1/8″3/4″1/8″1″161 8111
1/8″1″1/8″1″161 8131
1/8″1-1/2″1/8″1″161 8151
1/8″1/2″1/4″1-1/4″161 8161
1/8″3/4″1/4″1-1/4″161 8211
1/8″1″1/4″1-1/4″161 8271
1/8″1-1/2″1/4″1-1/4″161 8331
3/16″3/4″1/8″1-1/4″161 8451
3/16″3/4″1/4″1-1/4″161 8481
3/16″1″1/4″1-1/4″161 8521
1/4″3/4″1/4″1-1/4″161 8631
1/4″1″1/4″1-1/4″161 8661
1/4″1-1/2″1/4″1-1/4″161 8721
Bold part numbers denote stock items.  All other part numbers have a minimum order requirement.  Please call for details.

Selecting the proper mandrel

  • The mandrel pilot should match the diameter of the cartridge roll pilot hole.
  • The mandrel pilot length should be 1/4” – 1/2” shorter than the length of the cartridge roll.
Cartridge Roll LengthMandrel Pilot Length
3/4″1/2″
1″3/4″
1-1/2″1″
2″1-1/2″

Hardware Continued